Water filter parts & accessories

Zero water leakage. Recommended for most water filters and fridge filters in the market. Thread 1/4 inch. Tube 1/4

Tube 1/4, thread 1/4 inch. This JACO 4044 fitting offers you ZERO water leakage.

With this JACO fitting 1544 you can connect two separate tubes or extend another one. ZERO water leakage

Thread 1/4 inch. Use this fitting to unite two separate water filter housings

1/8 thread. Screw this fittin to RO's memrane inlet or outlet. 1/4 tube. Unscrew fitting's head. Push the tube with your hand and screw the head.

This fitting joins 1/4 tube with 3/8 inch tube. Zero water leakage

This adaptor is used mainly for countertop water filters. If your kitchen faucet doesn't have outter threads, then you need this adaptor. You simply screw the adaptor (with its own o ring) to your faucet.

2€ per meter. Cut it easily with a pair of scisors. Fits most water filters in the market. NSF approved material. Food grade material

Use this wrench to uncrew and screw your housing. It fits most standard water filter housings (except BIG BLUE housing type)

1/4 male thread. Screw this to your housing's inlet or outlet. Apply teflon if needed. 1/4 tube. Unscrew metal fitting's head. Push the tube with your hand and then screw the head clockwise. Zero water leakage

2€ per meter. Cut it easily with a pair of scisors. Fits most water filters in the market. NSF approved material. Food grade material. Blue color

2€ per meter. Cut it easily with a pair of scisors. Fits most water filters in the market. NSF approved material. Food grade material. Black color

DMfit-PTU-040404W Connection for 1/4 "Quick Fit hoses. Just push the hose inwards. It has fuses that do not allow the hose to be disconnected by mistake. Usually used in Reverse Osmosis systems.

DMfit-AMTUR 040404 Connection for 1/4 "Quick Fit hoses. Just push the hose inwards. It has fuses that do not allow the hose to be disconnected by mistake. Usually used in Reverse Osmosis systems.

Use this wrench to unscrew and screw Reverse Osmosis membrane housing.

2€ per meter. Tube 3/8 inch. You can easily cut it with a pair of scisors. NSF approved. Food grade material

This oring fits only to countertop GRSKGCT1WW14 water filter and is used to prevent water leakage. Over the years it hardens and as a result it needs to be replaced.

Under-sink water filters that are connected directly to your tap's cold water supply, all use these 1/2" metal fittings
To install an under-sink water filter you need to screw the metal hose on these fittings.

This oring fits only to USAGB water filters and is used to prevent water leakage. Over the years it hardens and as a result it needs to be replaced.

This check valve doesn't let water flow backwards to the membrane, thus increasing its life span. When RO's tank is full, water starts flowing backwards increasing pressure untill the auto shutt off valve shuts the system down. This check valve helps speed things up.  

This component is placed at the water inlet of the membrane filter case. It is also placed at the outlet of the discarded water in the membrane filter case.

Most Doulton water filters have 3/8 inch tubes, while most water filter faucets have 1/4 inch threads (water inlets). This fitting connects your water filter tube (3/8 inch) with your water filter faucet (1/4 inch thread).

With this adapter you can connect a water filter with a 1/2 inch outlet with a 1/4 hose. For example, if you already have a 1/2 inch input / output device but wish to connect it with a separate faucet, then you will need this accessory.

Heavy duty female 1/2" metal hose suitable for faucets, water heaters, under-sink water filters etc .

Heavy duty female 1/2" to male 1/2" metal hose suitable for faucets, water heaters, under-sink water filters etc .

Connects to the Feed water connector which is connected to your cold water supply. Use this valve to adjust pressure to your water filter or switch off your water filter's water supply to replace its cartridges.

It connects to your cold water supply. Thread 1/2 inch. Screw the feed water connector valve on this fitting.

The feed water connector interferes with the cold water supply under your kitchen counter and "steals" cold water that sends it to your water filter. This valve is screwed onto the feed water connector and sends the water to the water filter with a 3/8 tube.

The adapter connects the countertop water filter distributor to your kitchen faucet if your faucet does not have the regular size.

Water inlet is 1/4 inch. Packaging includes all necessary parts & accessories for connection

Connects to your countertop water filter's 1/4 tube. Remove your faucet's aerator and then screw this diverter. Use the switch to toggle between unfiltered and filtered water. It has its own water flow aerator. Made from stainless steel. Packaging includes a metal adaptor in case your faucet has inner threads.

If your old faucet got rusty, just replace it with this one! It has a thread of 1/4 inch. Unscrew the old one and screw this faucet

Perfect for all water filtration kits and any situation where you need to limit your water pressure to 70 psi

Connects to your countertop water filter's 3/8 tube. Remove your faucet's aerator and then screw this diverter. Use the switch to toggle between unfiltered and filtered water. It has its own water flow aerator. Made from stainless steel. Packaging includes a metal adaptor in case your faucet has inner threads.

If there is high pressure in your water network, install this pressure regulator to protect your water filter from an hydraulic shock. For pipes 3/8".

Compatible with GRSKGCT1WW14 countertop water filter. During assemply, we use stainless steel screws, so you can use the same when you need to replace this base. 

Water leakage sensor for filtering systems. It automatically cuts water supply to the filter in the event of a technical problem and leakage. It is installed in the water inlet of the under-sink filter and prevents flooding in the kitchen cabinet where it is installed.

Use this double diverter if you don't want to use a faucet in your countertop water filter. Inlet and outlet is 1/4 inch tube. Unscrew head, push the tube with your hand and screw the head back clockwise. It comes with a metal adaptor in case your faucet has internal threads. Use the switch to toggle between unfiltered and filtered water.

Water inlet is 1/4 inch. It includes all necessary parts & accessories for the installation

The FARG-480 pressure reducer is small in size and ideal for high pressure water networks. You can install it in the main supply of your home as well as in the water inlet of a water filter. It offers 3 - 3.5 bar output pressure.

Made in Italy

Suitable for USAGB type, single under-sink water filters. It may suit other water filters as well. It has cavities in case your water filter has decompress button. Made in Greece with HEAVY DUTY stainless steel

PRIMATO DELUXE 101 faucet adds style and finesse to your kitchen! It can connect to most standard water filters in the market (inlet is 1/4 inch). Height 24cm

The pressure regulator is installed in the central water supply and protects all home appliances as well as the pipes from hydraulic shocks, that is, sharp pressure fluctuations in the water network.

It is manufactured by the american WATTS.

Suitable for USAGB type, double under-sink water filters. It may suit other water filters as well. It has cavities in case your water filter has decompress button. Made in Greece with HEAVY DUTY stainless steel

Suitable for USAGB type, triple under-sink water filters. It may suit other water filters as well. It has cavities in case your water filter has decompress button. Made in Greece with HEAVY DUTY stainless steel

PRIMATO DELUXE 181 faucet adds style and finesse to your kitchen! Height 29cm. Due to its curved construction, water runs straight down, which is perfect for filling pitchers and bottles with water.

PH meter measures Ph in your water. It is an ideal instrument if you are an aquarium owner, since fish can only live in a very specific environment.

If you want to install an under sink water filter but do not want to pierce your kitchen counter so as to install a separate faucet just for filtered water, then this faucet is the perfect solution for you. It has a 3-way switch: Filtered water, Cold tap water, Hot tap water. Height 31cm

If you want to install an under sink water filter but do not want to pierce your kitchen counter so as to install a separate faucet just for filtered water, then this faucet is the perfect solution for you. It has a 3-way switch: Filtered water, Cold tap water, Hot tap water. Height 32cm. Made by the spanish company Puricom

This faucet replaces your old kitchen faucet. It has 2 switches. With one you operate the faucet as a normal kitchen battery (hot, cold, lukewarm water etc) while with the other switch you have instantly clean water from the under-sink water filter.

Height 32.5 cm

Made in Spain