• Original water filter for Samsung refrigerator.
• If you bought your refrigerator after June 2010, then surely the refrigerator had this refrigerator filter. All older refrigerators will now use this model, as Samsung has stopped them and replaced them with it.
• Replace every 6 months or when the radiator lamp illuminates.
• It greatly improves the taste and smell of water.

This filter is certified by NSF International and is certified by ANSI / NSF Standards 42 and 53 to reduce the following:

99.00% asbestos

96.40% benzene

98.70% of Carbofuran

97.60% taste and odour

99.99% of cysts

99.80% dichlorobenzene

99.30% lead with pH 6.5 99.

40% Lead with pH 8.5 96.60%

hydrate at pH 6.5

88.90% mercury at pH 8.5

98.40% particles (Class I)

98.60% turbidity

Specifications:

• Operating pressure 20 - 125 PSI
• Operating temperature: 0.6 - 37.8 ° C
• Water flow: 1,893 liters per minute

Installation Instructions - Filter Change: 1. Rotate your old filter one quarter turn anticlockwise. 2. Pull the filter down and discard it. Do not worry, the water will shut down automatically. 3. Press the new filter until it stops. 4. Rotate the new filter one quarter turn clockwise. 5. Restart the filter change lamp in the refrigerator (if your refrigerator has such a lamp) Note: If you have difficulty installing your new filter, turn off the refrigerator water supply (usually behind the refrigerator) and flush some water. This will slightly lower the pressure and allow the new filter to snap immediately. To re-start the radiator lamp: 1. Press and hold the child lock and child lock buttons at the same time for 3 seconds. The light should now be green. 2. Note: If you hold them for 5 seconds, the process will be canceled and you should do so from the beginning. If this happens, simply release the buttons and proceed from the beginning. Some of the Samsung refrigerators that match this filter are:

Intercompatible with the following filters: